Snap-on 5000-ST Manual do Utilizador descarregar pdf (Página 19)

FUNCTIONAL DESCRIPTIONS AND SPECIFICATIONS CHAPTER 2

Rear Panel (Input/Output)

Figure 2-5: SURETEST Rear Panel

A- SOLENOID CONTROL (Hirose RM15TRD-12S)

PIN FUNCTION

10 Loader Relay Common

11 Loader Relay CCW Limit

12 Loader Relay CW Limit

B ANALOG OUTPUT (BNC)

Analog output provides a voltage level output that is directly proportional to transducer input,

from -1.8V (full scale counter clockwise) to +1.8V (full scale clockwise). Zero offset +/-100 mV.

Linearity +/-1% of reading. Maximum load = 5 mA.

When using the 4-in-1 transducer, zero output fluctuates until one of the transducers is

scan selected by applying 5% of full scale torque.

C- Foot Pedal Switch Input

D- Fuse Holder

Use AC fuse at specified rating only. ( 3.15 Amp).

E- INPUT AC VOLTAGE

Automatic Selection of any AC voltage from 100VAC to 230VAC, 50-60 Hz.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 73 74

Sem comentários

Snap-on 5000-ST Manual do Utilizador Página 19